- +41 41 982 04 12
- info@kelch.ch
- Mon - Fri: 8:00 - 17:00
Menu
Easy peasy
No torque adjustment (Nm) required when changing the insert
One for all
The DINAPLUS offers 14 inserts from T6 to T20
Just right
Maximum safety with minimum wear on your screws
Never overtighten a screw again with the DINAPLUS automatic torque screwdriver set
Handling
Step 2
To screw on, turn the screwdriver clockwise (CW) to the click point (clack). Based on the bit insert code, the correct torque is automatically achieved after the clack.
Step 1
Insert the bit insert suitable for the Torx profile into the handle and ensure that it engages correctly with an audible click. The number on the bit insert defines the correct Torx size.
Step 3
The counter-clockwise screwdriver (CCW) can be used for loosening. The bit insert can be replaced in the neutral position or after the click point (clack).
Handling
Step 1
Insert the bit insert suitable for the Torx profile into the handle and ensure that it engages correctly with an audible click. The number on the bit insert defines the correct Torx size.
Step 2
To screw on, turn the screwdriver clockwise (CW) to the click point (clack). Based on the bit insert code, the correct torque is automatically achieved after the clack.
Step 3
The counter-clockwise screwdriver (CCW) can be used for loosening. The bit insert can be replaced in the neutral position or after the click point (clack).
one handle
& Fourteen inserts
Simple, automatic and user-friendly!
ART. PKITDP00000 Kit contents
-
1x screwdriver
-
1x TORX T6 (Nm0.6)
-
1x TORX PLUS IP6 (Nm0.6)
-
1x TORX T7 (Nm0,9)
-
1x TORX PLUS IP7 (Nm0,9)
-
1x TORX T8 (Nm1,2)
-
1x TORX PLUS IP8 (Nm1,2)
-
1x TORX T9 (Nm1,4)
-
1x TORX PLUS IP9 (Nm1,4)
-
1x TORX T10 (Nm2,0)
-
1x TORX PLUS IP10 (Nm2,0)
-
1x TORX T15 (Nm3,0)
-
1x TORX PLUS IP15 (Nm3,0)
-
1x TORX T20 (Nm5,0)
-
1x TORX PLUS IP20 (Nm5,0)
